Antique / Sand Finish
Sand Finish Concrete
Also called antique finish. A softer, finer surface than exposed aggregate — retarder at a controlled depth, washed to reveal the fine sand.
What is sand finish concrete?
The antique — or sand — finish is similar to exposed aggregate, but it is a different finish — a more refined one. It starts with a proprietary mix design developed over the years. The surface is washed to reveal the fine sand beneath, giving a softer, finer surface with a warm, natural look — no sandblasting, no mechanical grinding.
It is also known as sand wash, buff wash, or a light-exposure finish. North Shore Aggregate is one of the few contractors in the Midwest who offer this finish.
What it is not:
- Not sandblasting — that is a post-cure abrasive treatment, done after the concrete has cured. The sand finish is done at the pour, with a retarder and a wash.
- Not acid etching / acid wash — the finish is not created by etching the surface with acid; it is made at the pour, with a retarder and a wash.
- Not stamped-concrete “antiquing” — that is a colour/release effect on a stamped pattern. The sand finish is a poured finish, not a pattern.
How we build it
First we set the forms — precision framing and grading, because the finish can only come out right if the work under it is exact. Then the mix: a proprietary mix design developed over the years. We finish the concrete paying attention to what’s under the surface. Knowing from experience when the timing is right, we apply a controlled-depth surface retarder, then wash the surface later that day or the next to reveal the fine sand. No sandblasting, no mechanical grinding.
Frequently asked questions
What is sand finish concrete?
A poured concrete finish — also called antique finish — made from a proprietary mix design; the surface is washed to reveal the fine sand beneath, giving a softer, finer surface than exposed aggregate.
Is sand finish the same as exposed aggregate?
No. Exposed aggregate has a different mix design and reveals more stone. See the exposed aggregate page →
Is it the same as sandblasting?
No. Sandblasting is done after the concrete cures, with abrasive media. The sand finish is done at the pour, with a retarder and a wash.
Is it the same as “antiquing” stamped concrete?
No. Antiquing is a colour/release effect on stamped concrete. The sand finish is a poured finish.
What is it also called?
Antique finish, sand wash, buff wash, or a light-exposure finish — different names for the same family of washed, fine-sand surface.
Where does it work best?
Pool decks, driveways, walkways, patios.
Is it slippery when wet?
No. The fine sand texture gives good grip.
How is it different from broom finish?
Broom finish is lines dragged across wet concrete; sand finish is a washed surface with no lines and a warmer, more natural look.
How much does it cost?
It depends on the size of the area, whether old concrete has to come out, how easy the site is to reach, and how much detail is involved — steps, borders, and tight work take more time. It is a premium finish and costs more than standard broom. Reach out for pricing on your project, and ask about our project minimum.
See it in person
The best way to choose is to see finished examples. We pour this finish across Chicago’s North Shore and the northwest suburbs. Call (847) 566-6111 or email info@northshoreaggregate.com — North Shore Aggregate, 3337 Berwyn Ave Suite 200, Lake Bluff, IL 60044.
North Shore Aggregate
Contact us for an estimate
Every project starts with a conversation. Tell us about your space and your vision. The best way to start is our contact page. It’ll get the process moving forward.
